Every service, explained.

We install Level 2 home chargers that refill your EV overnight — up to 10× faster than a wall outlet. Every install starts with a look at your electrical system so the charger you get is safe, code-compliant, and ready for the car you drive (and the next one). Clean conduit runs, a dedicated circuit, and a walkthrough before we leave.

• All major charger brands installed and configured
• Garage, driveway, and exterior mounting
• Panel-ready installs — if your panel needs work, we quote it together in one visit

Older 100-amp panels weren't built for today's kitchens, HVAC, and vehicles. We replace aging, overloaded, and recalled panels with modern 200-amp service — neatly labeled, thermally checked, and inspected. If breakers trip often, lights dim when appliances start, or your panel brand has a known history, it's time for a conversation.

• 100A → 200A service upgrades
• Smart panel and load-management options
• Permits and inspection handled for you

A whole-home standby generator senses an outage and restores your power automatically in seconds — heat, refrigeration, medical equipment, security, all of it. We size the unit to your home, handle placement, gas coordination, and the transfer switch, and offer annual maintenance so it starts every time it's needed.

• Whole-home automatic standby systems
• Portable-generator inlet & interlock options

Lighting is the difference between a house and a home that glows. We design layered interior lighting — ambient, task, accent — and architectural landscape lighting that makes an evening arrival feel like a reveal. We work from your plans or build the plan with you, and coordinate directly with designers and architects.

• Interior lighting plans & installation
• Landscape & architectural exterior lighting
• Designer and architect coordination

We replace dated recessed cans and fixtures with modern LED trims that render color beautifully and sip electricity — plus under-cabinet lighting that transforms kitchens. Most whole-home LED conversions pay for themselves in energy savings, and everything is dimmer-matched so nothing flickers.

• Recessed LED trim conversions
• Under-cabinet & accent lighting
• Dimmer matching — no flicker, no buzz

Smart thermostats that trim energy bills, video doorbells that watch the porch, lighting scenes that greet you at the door — installed cleanly, wired properly, and fully configured on your phone before we leave. No half-working gadgets, no rat's nest of wires.

• Smart thermostats, doorbells & cameras
• Automated lighting scenes & smart switches
• Setup completed on your devices before we go

Modern homes are full of sensitive electronics — HVAC boards, appliances, TVs, computers. A whole-home surge protector installs at your panel and shields all of it from lightning and utility surges. It's an hour of work that protects tens of thousands of dollars of equipment.

• Installed at the panel in about an hour
• Protects appliances, HVAC & electronics
• Perfect add-on to any panel or charger job

Faded, handwritten, or flat-out wrong panel labels turn every tripped breaker into a guessing game — and in an emergency, seconds matter. We trace every circuit in your home, test each one, and give you a clean, accurate, printed directory inside the panel door. It cuts future troubleshooting time, keeps your family and first responders safe, and it's required by code (NEC 408.4) to be clear and specific.

• Every circuit traced and tested — not guessed
• Clean typed labels and a full directory card
• Great add-on to any panel or repair visit

Worn outlets that no longer grip a plug, cracked cover plates, yellowed switches, and painted-over devices aren't just ugly — loose outlets arc and are a leading cause of house fires. We swap out tired devices for crisp new ones, add USB or tamper-resistant outlets where you want them, and leave every plate flush and clean.

• Outlets, switches, dimmers & cover plates renewed
• USB, tamper-resistant & GFCI options
• Whole-house or one room at a time

A loud, weak bath fan doesn't move enough air to stop the moisture that causes mold, peeling paint, and warped trim. We install modern ultra-quiet fans — many with humidity sensors and built-in LED lighting — that clear the air on their own and you'll barely hear them run. Properly vented to the outside, wired to code, and matched to your bathroom's size.

• Whisper-quiet, high-efficiency fans
• Humidity-sensing & light-combo models
• Vented correctly to stop mold & moisture

Breakers wear out, and older panels often lack the arc-fault (AFCI) and ground-fault (GFCI) protection today's code requires. We replace worn, undersized, or recalled breakers and add modern AFCI/GFCI protection where it belongs — bedrooms, kitchens, baths, and more. If your breakers trip for no clear reason or feel warm to the touch, don't wait.

• AFCI & GFCI breaker installation
• Worn, recalled & undersized breakers replaced
• Correct breaker matched to every wire size

Knob-and-tube and other pre-1950s wiring has no ground, brittle insulation, and can't handle a modern home's load — which is why many insurers now surcharge, require replacement, or refuse to cover it entirely. We assess what you have, explain the risk plainly, and replace it with modern grounded wiring — from targeted problem areas to a full rewire. We pull the permits, do the work, pass inspection, and clean up behind us.

• Full or partial rewires — grounded & to code
• Documentation your insurer will accept
• Permits, inspection & cleanup handled

Every outdoor AC unit needs a disconnect within sight so power can be cut safely for service — it's required by code (NEC 440.14) and HVAC techs won't work without one. We install or replace weatherproof disconnects, whip, and wiring so your system is safe, serviceable, and inspection-ready. A fast, affordable job that's often needed before a new AC install or repair.

• Weatherproof disconnects installed to code
• Whip & wiring to the condenser included
• Ready for your HVAC install or service call

Old fluorescent and metal-halide fixtures burn more power, fail constantly, and their ballasts flicker, hum, and cost you service calls. We retrofit commercial spaces to LED — cutting lighting energy use by up to 50%, eliminating ballast failures, and improving light quality your people actually notice. Most projects pay for themselves in 1–3 years, and many qualify for utility rebates we'll help you capture.

• Ballast-bypass LED tube & fixture conversions
• Offices, warehouses, retail & plazas
• Utility rebate guidance to shorten payback

Your electrical service — the meter, service mast, main breaker, and the wiring feeding your home — is the backbone of everything. When it's old, undersized, or damaged, a service change brings it up to modern standards and capacity. We coordinate with your utility, handle the permit and inspection, replace the outside meter base and service entrance, and get your power back on safely. Often the first step before adding an EV charger, hot tub, addition, or solar.

• Full service upgrades & outside meter base replacement
• Utility coordination, permits & inspection handled
• Sized for today's loads and tomorrow's plans

When your main panel is full or you're adding power to a garage, workshop, addition, or detached building, a subpanel is the clean solution. It's a secondary panel fed from your main that gives you room for new circuits and puts breakers close to where they're used — no more long runs or an overcrowded main panel. We install it correctly, with neutrals and grounds properly separated and everything to code.

• Garage, workshop, addition & detached-building subpanels
• Frees up space when your main panel is full
• Installed to code — proper grounding and feeder sizing

Dead outlets, tripping breakers, flickering lights, mystery switches — we diagnose the cause, show you options in writing, and fix it properly. On time, in shoe covers, with the site cleaner than we found it, and a whole-home safety check included with every visit.

• Troubleshooting & same-day repair
• Whole-home safety inspections
• 1-year written warranty on workmanship